Servicing: Brevard, Clay, Duval, Flagler, Hillsborough, Indian River, Lake, Manatee,
Martin, Nassau, Orange, Osceola, Pasco, Polk, Putnam, Sarasota, Seminole,
St. Johns, St. Lucie and Volusia Counties.

For Heat Pump Systems Only.
Check list may vary depending on the type of comfort
system you have in your home.

20 Point Check List

1. Check system for proper refrigerant charge
2. Check compressor and fan amps
3. Check and clean condenser coil
4. Check capacitors
5. Check contactor points
6. Brush our electrical cabinet
7. Check all caps and valves for seals and/or proper snug fit
8. Check thermostat operation and mounting
9. Check blower amps
10. Check heal strip amps, circuit components and safeties
11. Check/evaluate evaporator coil for buildup
12. Check blower wheel for buildup
13. Check all electrical connections and wires
14. Change/wash filter
15. Check temperature splits
16. Lubricate all moving parts where applicable
17. Flush and vacuum drain line/pan and evaluate drainage
18. Check float switch operation
19. Clean equipment exterior
20. Check final performance and report necessary improvements
    

20 Point Plus Check List

Includes all of the above plus these additional services:

1. Check system for proper refrigerant charge
2. Check compressor and fan amps
3. Check and clean condenser coil
4. Clean vegetation, etc. from outdoor unit
5. Check and clean condenser fan
6. Check crankcase heater
   
7. Check capacitors
8. Check contactor points
9. Check reversing valve operation
   
10. Brush out electrical cabinet
11. Check for excessive vibration
12. Check condenser level
13. Check safety controls where applicable
14. Check all caps and valves for seals and/or proper snug fit
15. Check thermostat operation and mounting
16. Check blower amps
17. Check heat strip amps, circuit components and safeties
18. Check/evaluate evaporator coil for buildup
19. Check blower wheel for buildup
20. Check all electrical connections and wires
21. Change/wash filter
22. Check temperature splits
23. Lubricate all moving parts where applicable
24. Flush and vacuum drain line/pan and evaluate drainage
25. Check float switch operation
26. Clean equipment exterior
27. Clean/dust return air grills
28. Treat AH/evap coil/case coil and plenum with Micro-Ban
29. Check for air leaks at plenum
30. Check final performance and report necessary improvements
    

All prices based on 1 system.

Commercial Preventative Maintenance

Please call us and schedule a free estimate for a tailor made maintenance program for your company.

Schedule an appointment online and receive $10.00 off preventative maintenance service.